TELEMETRIX 400 UAV, TARGET, AND MISSILE TEST SYSTEM (T400UTM)
OVERVIEW
 The RT Logic Telemetrix® product line includes a telemetry test system for UAVs, targets, and missiles, and their ground systems, that greatly reduces the need for actual flights. The T400UTM generates signals from previously recorded telemetry files, simulated telemetry files, or pseudo-random numeric (PRN) sequences. It then perturbs these signals with phase-continuous Doppler, delay, fading, and noise associated with actual, nominal, or worst-case mission flight paths and environmental conditions. The resulting IF or RF signals, indistinguishable from an actual mission, enable fully realistic, yet stationary and economical tests.



The T400UTM can also be used to test transmitting systems on UAVs, targets, missiles, ground stations, etc.
APPLICATION
 The T400UTM provides UAV, target, missile, and ground station telemetry processing system verification without the expense and hazard of actual flights. It ensures that all telemetry hardware, software, and processing systems fully meet specifications. Test mission planning and visualization are provided by RT Logic software operating in conjunction with Analytical Graphics, Inc.’s STK software. The T400UTM’s TCP/IP command capability allows it to be easily integrated with existing user systems.
FEATURES
 The T400UTM is an open and highly modular system, integrating easily and economically with a wide variety of RT Logic and non-RT Logic components.
  • Signal generator for test signal creation, as well as interference and jammer introduction
  • Ability to “play back” digital pre-recorded or generated telemetry at RF
  • RT Logic GUI, TCP/IP, and Analytical Graphics’ STK control
  • Multiple RF output frequency, output power, and transmitting antenna options
RECEIVE SYSTEM TESTING BLOCK DIAGRAM

TRANSMIT SYSTEM TESTING BLOCK DIAGRAM

SPECS
Channel Simulation
  • RF Output: 70 MHz, UHF, L-,
    S-, C-, X-, Ku-band
  • Instantaneous Bandwidth: 40 MHz
  • Time Delay: 3 µs To 1250 ms,
    < 1 ns Resolution, Phase Continuous
  • Doppler: ±500 KHz, < 1 Hz Resolution, Phase Continuous
  • Fading: Up To 50 dB, <0.5 dB Resolution, Phase Continuous
  • Attenuation: 0 To 30 dB
  • Instantaneous Dynamic Range:
    40 dB
  • Amplitude Response: ±0.5 dB
Pre-Recorded Or Simulated Telemetry
  • Please Refer To RT Logic’s T400TSS Waveform Signal Generator
 Test And/Or Interference PRN Signals
  • Bandwidth: 40 MHz
  • Modulation Types
  • PCM/FM, SOQPSK-TG, Multi-h CPM, BPSK, DPSK, SQPSK, 8PSK, MSK, FSK, AM, FM, CW
  • Firmware Implementation For Upgradability
  • Channels: 8 With Independent Modulation Type, Data Rate, Shaping, And Amplitude
  • Data rate: Up To 26 Mbits/sec, Depending On Modulation Type
  • Shaping: None, Raised Cosine, Root Raised Cosine